Don't lose this product
Bookmark it, Email it, Share it
Truck King Pin & Brake Anchor Pin Pusher No Hydraulics
No. OTC-4241
Truck King Pin & Brake Anchor Pin Pusher No Hydraulics
Remove king pins & anchor pins from most
models of trucks & buses.
Here’s the answer!
When servicing king pins, this unit is quickly mounted on the front axle… a
unique “swinging gate” feature makes setup easy. Both straight and tapered king
pins may be serviced. Five special collars and two pins accommodate king pins
of 7/8" to 2" in diameter and up to 11-1/4" long.
With tooling in position, up to 30 tons of hydraulic force is applied…even the
most tightly “frozen” king pin is eased out. A job that could consume the better
part of a work day is done in minutes.
With the special anchor pin adapter installed in the pusher’s base block, and the
unit properly positioned over the brake spider, the anchor pin can be quickly and
easily pressed out. The unit measures 271/2" high x 81/2" wide. Made in U.S.A.
Features:
30 tons of hydraulic force replace torch and sledgehammer methods
Accommodates king pins of 7/8" to 2" in diameter and 11-1/4" in length
